Stronghold ICF - FX Series
FX 45° Corner Block Product Specifications
FX-Series 45° Corner Block - Coming Soon
45° Corner blocks are a welcome addition to the job-site, making the contractors job much easier.
Overview
45° Corner blocks are a welcome addition to the job-site, making the contractors job much easier. The FX Series 45° Corner blocks are made from 16" tall panels with a long leg and a short leg allowing for a 16" overlap when alternated during installation. The foam panels are 1.5lb. density, 2.75" thick with reversible interlocking foam teeth along the top and bottom panel edges. The panels are held in a structural position with 5 fixed webs, spaced 8" apart, and a corner web assembly. The corner web assembly consists of 2 vertical webs on each side and 2 horizontal 1.5" wide bands that are locked into the vertical webs and tied together with 2 diagonal straps that interlock with the webs on the inner corner for unparalleled strength and fastening capabilities.
6" FX 45° Corner Block
- Core Width: 6" (152mm)
- Form Width: 11.5" (292mm)
- Long Leg Length: 40" (1016mm)
- Short Leg Length: 24" (610mm)
- Form Height: 16" (406mm)
- Surface Area: 7.11sf (159cm^2)
- Concrete Volume: 0.11yd^3 (0.081m^3)
8" FX 45° Corner Block
- Core Width: 8" (203mm)
- Form Width: 13.5" (343mm)
- Long Leg Length: 42" (1067mm)
- Short Leg Length: 26" (660mm)
- Form Height: 16" (406mm)
- Surface Area: 7.56sf (169cm^2)
- Concrete Volume: 0.15yd^3 (0.114m^3)